Two 127 × 177.8 mm prints fit A4 when rotated. Keep both at actual size rather than shrinking the PDF.
Worked example
| Paper | A4 / 210 × 297 mm |
|---|---|
| Set the size | 127 × 177.8 mm |
| Margin | 10 mm |
| Gap | 5 mm |
| Available area | 190 × 277 mm |
| Portrait grid | 1 |
| Rotated grid | 2 |
| Regular grid estimate | 2 |
Calculation
Subtract both margins from the paper dimensions. For each orientation, divide the usable width and height by the photo size plus the gap, then round down. The table compares uniform grids, not every possible mixed arrangement. Use the layout tool to place the actual copies. Keep the selected physical dimensions when rotating a photo.
How to use these numbers
- Add a JPG, PNG or WebP image. Enter the intended width and height, then choose the paper.
- Whole image preserves every edge and may leave white space. Crop to fill fills the chosen rectangle and removes edges when proportions differ.
- Check all pages in the preview. Download the PDF, print at 100% and measure the control square.
Open the tool: Photos per Page Calculator
Before printing
Choose Actual size or 100% in your PDF viewer. Match the PDF paper size and measure the 20 mm square after printing.