Calculation
Subtract both margins from the paper dimensions. For each orientation, divide the usable dimension plus one gap by the photo dimension plus one gap, then round down. A cutting gap is needed only between adjacent photos. The table compares uniform grids, not every possible mixed arrangement. Use the layout tool to place the actual copies. Keep the selected physical dimensions when rotating a photo.
Worked example
| Paper | A4 / 210 × 297 mm |
|---|---|
| Set the size | 127 × 177.8 mm |
| Margin | 10 mm |
| Gap | 5 mm |
| Available area | 190 × 277 mm |
| Portrait grid | 1 |
| Rotated grid | 2 |
| Regular grid estimate | 2 |
Before printing
Choose Actual size or 100% in your PDF viewer. Match the PDF paper size and measure the 20 mm square after printing.
Fit two 100 mm squares across Letter
Letter is 215.9 mm wide. With 5 mm margins, 205.9 mm remains. Two 100 mm squares and one 5 mm cutting gap use 205 mm, so two squares fit across. There is no cutting gap after the last square.
For a mix of squares and rectangles, use the mixed-size photo layout to check where each print goes.